Mounting Your Thomson Gateway - THOMSON ST605 Installation And Setup Manual

2.1

Mounting your Thomson Gateway

Setup possibilities
You can mount the Thomson Gateway on a wall or simply place it on a desk.
Wall mount
Proceed as follows to mount the Thomson Gateway on a wall or other vertical surface:
1 Drill two holes in the wall or other vertical surface where you want to place the Thomson Gateway.
2 Fasten two screws in the wall holes. The screws should protrude five millimetres from the surface of the
wall.
3 Attach your Thomson Gateway on the wall using the two mounting slots on the bottom.
i
If you install the Thomson Gateway onto plasterboard, use dowels to secure the screws.
Otherwise the strain of the cables connected to the Thomson Gateway rear panel connectors
could pull the Thomson Gateway from the wall.
6
*ACCESS CODE 0123456789*
MODEM ACCESS CODE: 0123456789
N10406
*MACADDRESS AAABCCCDDEEE* SpeedTouch ZZZ
THOMSON TELECOM
IC: 431F-STZZZ SSID:SoeedTouchVVVVVV
MAC: AAABCCCDDEEE
WEP (hex):1234ABCDEF
!
THIS DEVICE CONTAINS A RADIO MODULE
WPA PSK: 1234ABCDEF
FROM THOMSON TELECOM BELGIUM,
MODEL NUMBER SPEEDTOUCH XXXX,
TCM: 12345670
CERTIF NO RSE-STXXXX
US:TMBXXXXXXXXXXX
*DSLBSFFFFF RQQI*DSLBSFFFFF RQQI
DSLBSFFFFF RQQI
*MACADDRESS AABCCCDDEEE*
C US
S/N:CPYYWWPPXXX (CC)
XXXXXXX
CET APPAREIL NUMERIQUE DE LA CLASSE B
CONFORMS TO:
UL STD 60950-1 EST CONFORME A LA NORME NMB-003 DU CANADA
THIS CLASS B DIGITAL APPARATUS
CERTIFIED TO:
COMPLIES WITH CANADIAN ICES-003
CAN/CSA STD C22.2 ~
RATED INPUT: 18V
No.60950-1
MADE IN COUNTRY 1000mA
Chapter 2
Basic Installation
E-DOC-CTC-20060911-0089 v1.0