Canon imageFORMULA DR-M1060 User Manual page 54

• When [Speed priority] is selected, a 400-/600-dpi image is generated
from the image scanned at 300 dpi. The scanning speed will be
faster, but the quality will be slightly reduced.
• When [Image quality priority] is selected, documents will always be
scanned at 600 dpi. When [Dots per inch] is set to [400 dpi], a 400-
dpi image will be generated from the image scanned at 600 dpi. The
scanning speed will be slightly reduced.
Scanning Documents of Unregistered
Page Sizes
You can register a non-standard page size that has not been
registered as a page size by naming and registering it as a custom
page size in the Custom Paper Size dialog box, which is opened from
the [Save] button on the [Basic] tab.
Specifying the Scan Area
Configure the following settings when you want to specify the area of
the document to be scanned.
Specifying an area
Specify the area of the document to be scanned in the Scan Area
dialog box, which is opened from the [Area] button on the [Basic] tab.
54