Canon imageFORMULA DR-M1060 User Manual page 67

5
Clean the rollers.
Clean the rollers while turning them.
Wipe the rollers with a cloth that has been dampened with water
and thoroughly wrung out, and then use a clean, dry and soft cloth
to wipe away any moisture.
6
Remove the retard roller and feed roller.
IMPORTANT
Remove the retard roller and feed roller from the scanner to clean
them, and be sure to reattach them to the scanner when cleaning
is finished.
7
Wipe the removed rollers with a cloth that has been
dampened with water and thoroughly wrung out.
8
Reattach the retard roller and feeding roller.
p. 72)
9
Close the upper unit by gently pushing down on the left
Rollers
and right sides. Push until it clicks into place to make
sure that it is completely closed.
(See p. 71, p. 72)
67
(See p. 71,