How To Place Documents; Switching The Feed And Eject Methods - Canon imageFORMULA DR-M1060 User Manual

How to Place Documents

Switching the Feed and Eject
Methods
Switch the feed and eject methods based on the type of document you
are scanning.
The U-turn path is used when the straight path tray at the rear of the
scanner is closed, and the straight path is used when it is opened.
U-turn path
Non separation
Standard feeding
feeding
Standard feeding is used when the feed selection lever at the front of the
scanner is lowered, and non separation feeding is used when it is raised.
Straight path
Standard feeding is used to feed documents one page at a time. Non
separation feeding is used to feed bound or fastened multi-page
documents or folded documents without separating them.
Feed and Eject Methods for Different Document Types
Feed
Document type
method
Plain paper Either
Business cards Either
Plastic cards Either
Thick paper Either
Thin paper Either
Bound or Non sepa-
fastened paper ration
(e.g., invoices) feeding
Non sepa-
Long
ration
documents
feeding
Non sepa-
Half-folded
ration
paper
feeding
Hint
When scanning documents that contain both plain paper and plastic
cards, place the cards at the top and use the straight path.
24
Eject
Remarks
method
Either
Straight
Place cards vertically.
path
Straight
Place cards vertically.
path
Straight
path
Either
Either
Either
Either