Canon imageFORMULA DR-M1060 User Manual page 31

What to do when a double feed is
detected
When not using the double feed detection ignore function
If a document double feed is detected during scanning, document
feeding stops when the double fed documents are ejected. When this
happens, the following error code is displayed in the Job No. Indicator
of the operating panel.
Double feed detection error code
Also, a message screen is displayed to notify you that a double feed
has been detected. For example, the following screen is displayed in
CapturePerfect.
When this happens, stop the scanning in the application and then
scan the documents again.
When using the double feed detection ignore function
If a document double feed is detected during scanning, document
feeding stops when the double fed documents are ejected. The
following error code is displayed in the Job No. Indicator of the
operating panel, and the DFR button lights.
Double feed detection error code
Also, the [Rapid Recovery System] screen appears to enable you to
specify whether to continue scanning.
31