Basic Operation; Documents - Canon imageFORMULA DR-M1060 User Manual

Basic Operation

Documents

The scanner can scan documents ranging in size from business cards
to A3. (Up to A1 size is possible with folio scanning in Long Document
mode.) The document sizes that this scanner can scan are shown
below.
Plain Paper
Size
Width: 50.8 mm to 300 mm (2" to 11.8")
Length: 70 mm to 432 mm (2.8" to 17")
Up to 3,000 mm (118.1") in Long Document mode
Paper thickness
U-turn path (page separation):
2
27 to 128 g/m (0.04 to 0.15 mm)
U-turn path (bypass):
2
27 to 164 g/m (0.04 to 0.2 mm)
Straight path:
2
27 to 255 g/m (0.04 to 0.3 mm)
Loading capacity (for 80 g/m
A4 size or smaller:
Maximum of 60 sheets
Larger than A4 size:
Maximum of 25 sheets
2
paper)
IMPORTANT
The documents to be scanned must satisfy certain criteria. Read the
following items carefully.
• When scanning multiple documents of different sizes, place the
documents so that they cover the entire span of the feed rollers by
aligning the centers and leading edges of the documents.
• It is recommended that documents exceeding 432 mm (17") size
are fed one sheet at a time.
• Scanning documents before the ink is dry can cause problems with
the scanner. Always make sure that the ink on a document is dry
before scanning it.
• Scanning documents that are written in pencil or similar material
may make the rollers and scanning glass dirty, which can lead to
smudges on the scanned image and transfer the dirt to subsequent
documents. Always clean the internal parts of the scanner after
scanning such documents.
• When scanning a two-sided document that is printed on thin paper,
the image on the opposite side of each page may show through. In
this case, adjust the scanning intensity in the application software
before scanning the document.
22
Align the leading
edges
Feed roller
Align the centers