Detecting Staples And Feed Errors - Canon imageFORMULA DR-M1060 User Manual

When a skewed document is detected
Feeding automatically stops when a skewed document is detected
during scanning. The following error code is also displayed in the Job
No. Indicator of the operating panel.
Skew detection error code
Also, a message screen is displayed to notify you that a skewed
document has been detected.
Hint
If [Rapid recovery system] is enabled in the [Others] tab of the
scanner driver settings screen, the following screen appears instead
of the above message screen. In such cases, reload the document
and click [Yes] to continue scanning.

Detecting Staples and Feed Errors

This scanner includes a function that can detect documents that are
stapled together and a function that can detect feed errors.
When these functions are used, the scanner will stop a scanning
operation automatically when a stapled document is fed or a feed error
occurs, thereby preventing damage to the document.
The feed error detection function is useful for documents that are
148 mm (5.9") or larger in width.
To use the staple detection or feed error detection function, open the
scanner driver settings screen and enable the staple detection or feed
error detection function beforehand.
Setting procedure
1
Start CapturePerfect.
2
Open the scanner driver settings screen.
3
Click the [Feeding] tab.
4
Select the [Staple Detection] or [Paper feed error
detection] check box.
33
(See p. 48)
(See p. 50)