Placing Documents - Canon imageFORMULA DR-M1060 User Manual

Placing Documents

1
Switch the feed method based on the type of document
you are scanning.
When scanning plain paper or business cards, set the feed
selection lever to the standard feeding position (lower position).
The pages of a multi-page document will be separated and fed
one page at a time.
When scanning bound or fastened paper (e.g., invoices), set the
feed selection lever to the non separation feeding position (upper
position). As documents are scanned without page separation,
place the documents one page at a time (one set in the case of
bound or fastened paper).
For details on the feed methods for each document type,
p. 24.
2
Open the document feed tray.
3
Switch the eject method based on the type of document
you are scanning.
Ordinarily, you should scan with the straight path tray at the rear
of the scanner closed (U-turn path).
When scanning business cards, plastic cards, or other documents
you do not want to bend, open the straight path tray (straight
path).
For details on the eject methods for each document type,
p. 24.
see
4
If you are scanning long documents with the U-turn path,
extend the document feed support and open the eject
support.
25
see
Straight path