Waking The Mobile Computer - Motorola MC31XX Series Integrator Manual

Performing a Cold Boot
To perform a cold boot, simultaneously press and then release the 1, 9 and Power keys. Do not hold down any
other keys or buttons.
Splash Screen (Cold Boot)
Figure 1-15
Performing a Clean Boot
CAUTION
A clean boot resets the MC31XX to the factory default settings. All data in the Application folder is retained. You
must download the Clean Boot Package file from the Support Central web site
(http://www.motorola.com/enterprisemobility/support) and install on the MC31XX.
To perform a clean boot:
Download the MC31XX Clean Boot Package from the Support Central web site. Follow the instructions
1.
included in the package for installing the package onto the MC31XX.
Simultaneously press and release the Power button and the 1 and 9 keys.
2.
Immediately, as soon as the device starts to boot and before the splash screen is visible, press and hold the
3.
left scan button.
Insert the MC31XX into a powered cradle or cable.
4.
The MC31XX updates and then re-boots.
5.
After successful clean boot, the calibration screen appears.
6.

Waking the Mobile Computer

The wakeup conditions define what actions wake up the mobile computer after it has gone into suspend mode. The
mobile computer can go into suspend mode by either pressing the Power button or automatically by Control Panel
time-out settings. These settings are configurable and the factory default settings are shown in
A clean boot should only be performed by an authorized system administrator. You must connect the
MC31XX to AC power during a clean boot.
Removing AC power from the MC31XX during a clean boot may render the MC31XX inoperable.
Getting Started 1 - 13
Table 1-2.