Registering Sd (Shading) Adjustment Value - Nikon DS-L3 Instructions Manual

(3)

Registering SD (shading) adjustment value

Follow the steps below to register a user-defined shading adjustment value.
1 Find an evenly colored subject, and set it so as to be
viewed across the entire screen.
Make sure that there is no obstacle to block the light.
2 Display the [CAM MENU: NR/SD/SET] screen.
3 Press the [SD SET] button.
The [SD SET] submenu is displayed.
4 Press the [MEAS START] button.
The shading is measured, and a blue frame shows on the
button when it is completed.
Note: The measurement data may not be obtained
properly when the shading is large.
5 Press a desired button from among [USD1] to [USD7]
for specifying the registration number.
Pressing a button shows a blue frame on the button,
indicating that the [OK] button can now be pressed.
Note: The step 4 and 5 can be interchanged.
6 Press the [OK] button to register the user-defined
shading adjustment value.
The [SD SET] submenu closes.
Note: When you have registered a user-defined shading
adjustment value and closed the [SD SET] submenu,
the [SD] button shows the registered user-defined
shading adjustment value being selected.
Shading disabled with ROI-L/S or C.SCAN mode
If the image mode is set to [ROI-L], [ROI-S], or [C.SCAN], shading adjustment is disabled, and the [SD] and [SD
SET] buttons will be unavailable.
Chapter 8
Capturing Images with Advanced Setting Menu
97
2
Find an evenly colored subject,
and set it so as to be viewed
across the entire screen.
Specify the registration number.
Registration of user-defined shading adjustment values
1
4
5
6