Adjustment - Nikon SB-800 Repair Manual

Adjustment

Necessary equipment:
1. Adjustment software (J18355) *Refer to Page A25 of Repair Manual for the details.
2. Personal computer *Refer to Page A25 of Repair Manual for the details.
3. NEW high-speed communication tool (J15405)
4. Flash meter
5. Stabilized power supply (possible to output 0-6V, 3A)
6. Neutral test card (J18069)
7. Chart of inspecting focusing light (Copy and use the Page A27 of the Repair Manual.)
Adjustment items:
1. Writing of EEPROM initial value
2. Inspection & adjustment of power voltage of the main condenser
3. Adjustment of zoom home position
4. Inspection & adjustment of light volume
・ Inspection & adjustment of manual light volume
・ Inspection & adjustment of auto light volume
・ Inspection & adjustment of monitor flash volume
・ Inspection & adjustment of D-TTL flash
・ Inspection & adjustment of FP flash
・ Inspection & adjustment of wireless flash
5. Inspection of the number of times for flashing
6. Inspection & adjustment of focusing light
＊ The inspection (& adjustment) of all the Item 1-5 is made electrically by using PC, so be sure to follow the
instruction of the adjustment software.
Regarding 6."Focusing light adjustment", be sure to follow the instruction of Page A26.
※ In case the PCB (A) is replaced, be sure to make adjustments of 1 - 4.
※ In case the PCB (B) is replaced, be sure to make adjustments of 2 and 4.
※ In case the head unit of lighting unit is disassembled or a part of the head is replaced,
be sure to make adjustments of 3 and 4.
- A20 ･ SB-800 -
INC
FSA03501-R.3613.A