Safety Of Personnel; Material Safety; Preventing Equipment And Workpiece Damage - Asymtek Heli-Flow DV-8000 Series Owner's Manual

Safety of Personnel

•
Only trained personnel should be permitted to perform installation, operation, maintenance, and
troubleshooting procedures on the DV-7000/DV-8000 Series pumps.
•
Before performing maintenance or service on the DV-7000/DV-8000 pumps, position it at the
front of the dispensing chamber. This will provide easy access to components and limit exposure
to hazardous areas.
•
Immediately push the red Emergency Machine Off (EMO) button on your dispensing system if
personnel are in danger.
•
Do not touch the moving parts while the dispensing system is operating.
•
Remove the DV-7000/DV-8000 pump completely from the dispensing system and allow the
heated parts to cool before cleaning or performing maintenance.
•
Relieve pneumatic pressure before adjusting or servicing pressurized components.

Material Safety

•
Follow Material Safety Data Sheet (MSDS) recommendations for the proper handling, cleanup,
and disposal of hazardous materials.
•
Know the MSDS recommendations for treatment of injury resulting from exposure to hazardous
materials.
•
When working with multiple fluids, refer to the MSDS to ensure the materials are compatible.

Preventing Equipment and Workpiece Damage

•
Immediately push the EMO button on the dispensing system if the dispensing system, pump, or
a workpiece is in danger of being damaged.
•
Use standard Electrostatic Discharge (ESD) precautions when working near sensitive
components. Always wear a grounding strap and connect it to the ESD ground before handling
workpieces and equipment.
•
Perform all recommended DV-7000/DV-8000 maintenance procedures at the suggested
intervals.
•
Immediately contain and clean up any caustic or conductive fluid spills as recommended in the
material manufacturer's MSDS.
•
If fluid gets into internal portions of the DV-7000/DV-8000, immediately contact Asymtek
Technical Support.
•
Use only replacement parts that are designed for use with the original equipment. See the
Replacement
6
section for a list of available parts and part numbers.
Parts
Safety