CONFIDENTIAL
Sub-assembly L-(2)
4. Attach the motor-carriage to the frame-carriage assembly with the screws.
5. Slide the board-head relay assembly into position along guides
6.* Mount the gears in the order
7. Attach the lever-ribbon feed planet assembly so that the section
[Adjustment] Backlash adjustment of carriage feed pulley and carriage motor (see Adjustment B on
Rev. A
the screw.
page 5-54).
Lever-ribbon feed planet
assembly
to
in the illustration, and fasten them with the REs.
1
6
Disassembly, Assembly, and Adjustments 5-29
TM-U950/U950P Technical Manual
and
, and fasten it with
a
b
Frame-carriage assembly
encloses shaft
c
d
Frame-carriage assembly
.