Table of Contents
Advertisement
Quick Start Guide
This quick start guide describes how to install and use the Gigabit Ethernet SFP media
converter. The converter introduced here provides a one channel media conversion solution.
Physical Description
Product Overview
This Gigabit Ethernet SFP media converter is a plug-and-play device. Connect the supplied AC
to DC power adaptor to the receptacle on the rear panel of the Gigabit Ethernet media converter,
and then attach the plug into a standard AC outlet with a voltage range from 100 to 240V AC.
DIP Switch
DIP
Up (Default Setting)
switch
Left-hand
The fiber port auto detects
side
full and half duplex
Right-hand
Disable LFS
side
The 1000BaseT and 1000BaseSX/LX Connectors
The 1000BaseT
Connection
The following lists the pinouts of the
1000BaseT port.
The 1000BaseSX/LX
Connection
The SFP socket accepts standard Gigabit
Ethernet Small Form-factor Pluggable (SFP)
modules of various types and spectra.
Gigabit Ethernet SFP Media Converter
Down
Forces the fiber port to full
duplex mode
Enable LFS
2
LFS:
Link fault signaling
function
Advertisement
Table of Contents
