Operating Modes; Auto Mode; Cooling; Dehumidification - Jula Anslut 417-030 Operating Instructions Manual

The temperature is shown on the display symbol on the far right. The temperature shows the real
temperature when the system is in operation. When the temperature is changed the required temperature
is shown briefly, after which the real temperature is shown.

OPERATING MODES

Auto mode

During auto mode the system is controlled automatically and selects cooling, dehumidification or heating
on the basis of the set temperature. For home use we recommend that you do not select auto mode, but
manually select the required function (i.e. cooling or heating mode). This is because the system does not
take other heating methods into consideration, e.g. burning wood in a stove. If the indoor temperature is
higher than the set temperature on the pump, it will start to cool instead.
Press the On/Off button to start the system.
Now press the function button for auto mode, see symbol above. The status lamp on the indoor unit will
now turn yellow.
The heat pump will now run on a standard program to provide an optimum indoor climate.
The operating modes follow the sequence given below.
Room temperature during auto mode
27C or more
21-27C
21C or less
Auto mode is not to be recommended from the perspective of economy, and it is better to use the heating
or cooling mode.

Cooling

When cooling, the system only cools in relation to the set temperature. This means that the system
switches off when the temperature falls below the set temperature.
Press the On/Off button to start the system.
Now press the function button for cooling, see symbol above. The status lamp on the indoor unit will now
turn blue.
Adjust the temperature up or down by pressing + or - when you want it to be hotter or cooler. The
temperature changes by 1C each time it is pressed. The set temperature is shown on the right-hand side
in the display.

Dehumidification

On days with a high relative humidity the air can feel heavy, and you can get tired. Dehumidification
makes the indoor climate more comfortable. The best time to run dehumidification is when the outdoor
temperature is between 21 and 27 degrees.
Press the On/Off button to start the system.
Now press the function button for cooling, see symbol above. The status lamp on the indoor unit will now
turn white.
The temperature cannot be changed in dehumidification mode.

Air circulation

In air circulation mode the status lamp is green and the air circulates without heating or cooling. This
function is recommended when an alternative source of heat, e.g. wood stove, generates concentrated
heat and when some extra circulation of the air is wanted without the compressor on the heat pump
running.
ENGLISH
Settings
Cooling
Dehumidification
Heating
98