ON/OFF
Press the ON/OFF button to start and stop the unit.
You will now see
operating mode is active.
OPERATING MODES
Press the MODE button to select the operating mode.
Every time you press MODE the unit will change operation mode in the sequence:
Cooling
Heating
Default temperature setting:
Cooling: 22C.
Heating: 26C.
TEMPERATURE
In cooling or heating mode,
increase by 1C.
TEMP
decrease by 1C.
Press SW to select to control the unit to either the required room temperature or the required supply
temperature of the water.
When the status lamp flashes, the unit is regulated to suit the required supply temperature.
When the status lamp has a fixed beam, the unit is regulated to suit the room temperature in the room the
control panel is located.
TIMER/NIGHT REDUCTION
START-UP
1.
Press
Button for setting the start-up time for the unit.
2.
Set the hours and minutes for when the unit should start (not clock time).
Keep the button pressed to adjust the hours.
TIME
Press the button to adjust the minutes.
If you select START first this function will start first,
Note that the clock works on the 24h principle.
OPERATION
or
depending on which
ENGLISH
103