Unboxing Your Bowflex Revolution - Bowflex Revolution Assembly Instructions Manual

Unboxing Your Bowfl ex Revolution
Step 3
Parts:
• Rear Stabilizer (Box 2)
Tools:
• 5/16" Allen Wrench
• 7/32" Allen Wrench
• 3/4" Wrench or Adjustable Wrench
3-1 Place the Rear Stabilizer in the bracket on the Main Frame with
the feet pointing away from the frame. Make sure the two bolt
holes in the Rear Stabilizer are pointing downward.
3-2 Install but do not tighten two 3/8"x3/4" Allen Bolts and 3/8"
washers in the underside of the Rear Stabilizer.
3-3 Install two 1/2"x3 1/4" Allen Bolts with 1/2" washers and Nylock Nuts
in the sides of the Rear Stabilizer.
3-4 Completely tighten all of the hardware.
Hardware (1:1):
2 Allen Bolt (1/2" X 3 1/4")
Threaded bolt holes
point downward
1/2" Washer
1/2" Nylock Nut
Main Frame
™
Home Gym
Rear Stabilizer
Feet point away
from frame
1/2" Washer
3/8" Washer
Bracket
2 Nylock Nut (1/2")
4 Washer (1/2")
1/2"x 3 1/4" Allen Bolt
3/8"x 3/4" Allen Bolt
2 Washer (3/8")
2 Allen Bolt (3/8" X 3/4")
7 7