Bowflex Revolution Assembly Instructions Manual page 21

Assembling Your Bowfl ex Revolution
Step 14 Install Four Bar Assembly (continued)
Tools:
• 5/16" Allen Wrench
• 3/4" Wrench or Adjustable Wrench
14-1 The upper holes in the Four Bar Assembly
should now be aligned with the hole in
the Seat Rail. Install hardware and
completely tighten hardware from steps
11 and 12.
Hardware (1:1):
1 Allen Bolt (1/2" X 4 1/4")
Step 15 Install Leg Extension Assembly
Parts:
• Leg Extension Assembly (Box 3)
Tools:
• Two 5/16" Allen Wrenches
15-1 Remove the twist tie from the Leg
Extension Assembly. Align the Holes
in the Four Bar with the holes in the
Leg Extension Assembly.
15-2 Install and completely tighten hardware.
Hand tighten bolts on each side. Then tighten
with Allen Wrench. If the bolts rotate in the
chrome shaft of the Leg Extension Assembly,
look through the top notch hole of the
Assembly. If you see chrome, turn the bolt
on one side until you see black. Insert a small
4" screwdriver to lock the shaft in place and
tighten the other side bolt.
™
Home Gym
1/2" Washer
1/2" Nylock Nut
Seat Rail
Four Bar Assembly
2 Washer (1/2")
5/16"x 1/2" Allen Bolt
Top Notch Hole
Leg Extension Assembly
Hardware (1:1):
2 Allen Bolts (5/16" X 1/2")
1/2"x 4 1/4" Allen Bolt
Upper hole
1 Nylock Nut (1/2")
5/16" Washer
2 Washer (5/16")
19