Installation; Electrical Connection - Whirlpool K20 Instructions For Use And Installation

Environmental Hints
Packing
Do not throw the packing into the garbage: first sort out the different materials (i.e.:
steel, cardboard, polystyrene) following local regulations.
Conformity declaration
This appliance incorporates parts intended to come into contact with foodstuffs in
compliance with EEC directive 89/109/CEE.

INSTALLATION

In the ice bin of this appliance you will find the following accessories: instructions for
use, an envelope containing an ice pallet, a funnel with hose for periodical cleaning,
4 adjustable feet and washers.
- Fit the feet into the receptacles, proceeding as follows:
- Screw the 4 threaded supports on the bottom front and screw the adjustable
feet on the supports (Fig.1).
- Place the ice maker on a stable, level surface and adjust the feet if necessary.
- Do not install the unit close to a heat source, in a niche, or leaning against a
wall on one side; air must be free to circulate through the ventilation grids
(vicinity not less that 6cm).
- In rooms with an ambient temperature lower that +10 ºC or higher than +32
ºC, ice cubes production is not guaranteed. However, at ambient
temperatures from +16 ºC to +32 ºC, ice cubes production can be
guaranteed if a tropicalized unit is installed.

ELECTRICAL CONNECTION

Check that the voltage on the rating plate corresponds to the voltage in your home
(Fig.2).
Connect the appliance to the mains and ensure that it is working correctly before
storing food.
The earthing of this appliance is compulsory by law.
- The electrical and plumbing connection must be carried out by a qualified
technician, in compliance with local safety regulations. The manufacturer will
accept no liability for damage to persons or objects arising from non-
observance of this requirement.
K20 – K40 ICEMAKER INSTRUCTIONS