Table of Contents
Advertisement
INSTALLATION
Required conditions for placement of unit
IMPORTANT:
The NG machines are intended to work at room temperature between 5ºC and 43ºC
and with water temperature between 5ºC and 35ºC.
Difficulties during harvest cycle can appear below these minimum temperatures.
Above the maximum temperatures the life of the compressor becomes shorter and the
production decreases considerably.
IMPORTANT:
The new box-type frame in NG models allows a better ventilation in the air-cooled
machines, due to the fact that the condensers are placed in oblique position in the front
part of the machine.
The machines will work properly even if they are located in places with little
ventilation at the rear and lateral sides. The air is expelled by the front grill.
Bear in mind the previous remarks if the premises where the machine is located is very
dusty or smoky
The floor on which the machine will be place should be solid and as leveled as
possible.
Water and drainage
Water quality influences on ice hardness, flavour, and quality as well as condenser life.
Keep in mind the following points:
a) WATER IMPURITIES:
Major impurities are eliminated by filters provided. Filters should be cleaned
regularly depending on purity of water. For minor impurities we recommend installing a 5-
micron filter (Provided with the unit:. Part # ITV 7499).
18
Advertisement
Table of Contents
