Table of Contents
Advertisement
Quick Links
ICE MAKER INSTALLATION INSTRUCTIONS
INSTRUCTIONS D'INSTALLATION
DE LA MACHINE À GLAÇONS
INSTRUCCIONES DE INSTALACIÓN
TABLE OF CONTENTS/TABLE DES MATIÈRES/ÍNDICE
ICE MAKER SAFETY .................................. 1
INSTALLATION INSTRUCTIONS ............... 2
Unpack the Ice Maker .............................. 2
Location Requirements ............................ 2
Electrical Requirements ........................... 3
Water Supply Requirements .................... 4
Connect Water Supply ............................. 4
(on some models) ..................................... 5
Drain Connection ..................................... 8
Door Reversal-Side Swing Only ............ 9
Leveling .................................................. 11
Cleaning ................................................. 11
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
W11255279B
DE LA FÁBRICA DE HIELO
SÉCURITÉ DE LA MACHINE
À GLAÇONS .............................................. 13
INSTRUCTIONS D'INSTALLATION ......... 14
Déballage de la machine à glaçons ....... 14
Exigences d'emplacement ..................... 14
Spécifications électriques ...................... 15
Spécifications de l'alimentation en eau .. 16
Vacances ou longue
période d'inutilisation ............................. 16
Raccordement à la canalisation d'eau .. 16
Installation de la pompe de vidange
(sur certains modèles) ............................ 17
Raccord au drain .................................... 20
Inversion du sens de la porte -
porte à ouverture latérale uniquement ... 21
Mise à niveau ......................................... 23
Nettoyage ............................................... 23
ICE MAKER SAFETY
Your safety and the safety of others are very important.
DANGER
SEGURIDAD DE LA FÁBRICA
DE HIELO .................................................. 25
INSTRUCCIONES DE INSTALACIÓN ..... 26
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
Cómo desempacar la máquina
de hielo ................................................... 26
Requisitos de ubicación ......................... 26
Requisitos eléctricos .............................. 27
Requisitos del suministro de agua ......... 28
Vacaciones o tiempo prolongado
sin uso .................................................... 28
Conexión del suministro de agua .......... 28
Instalación de la bomba de desagüe
(en algunos modelos) ............................. 29
Conexión de desagüe ............................ 32
Reversión de puertas-
Solo lado de apertura ............................. 33
Nivelación ............................................... 35
Limpieza ................................................. 35
Advertisement
Table of Contents
Related Manuals for Whirlpool WUI75X15
Summary of Contents for Whirlpool WUI75X15
-
Page 1: Table Of Contents
ICE MAKER INSTALLATION INSTRUCTIONS INSTRUCTIONS D’INSTALLATION DE LA MACHINE À GLAÇONS INSTRUCCIONES DE INSTALACIÓN DE LA FÁBRICA DE HIELO TABLE OF CONTENTS/TABLE DES MATIÈRES/ÍNDICE ICE MAKER SAFETY ........1 SÉCURITÉ DE LA MACHINE SEGURIDAD DE LA FÁBRICA À GLAÇONS ..........13 DE HIELO ..........25 INSTALLATION INSTRUCTIONS .... -
Page 2: Installation Instructions
Failure to do so can result in back or other injury. of 1/4" (6.35 mm) OD soft copper tubing with a shutoff valve or a Whirlpool supply line Part Number 8212547RB, and a Whirlpool approved drain pump, Part Number 1901A, only to Removing Packaging Materials carry the water to an existing drain. -
Page 3: Electrical Requirements
Check that the ice maker door is not flush with the ■ Electrical Requirements standard cabinets to avoid problems with opening the ice maker door. WARNING Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. -
Page 4: Water Supply Requirements
The pressure of the water supply coming out of a reverse ■ Use copper tubing or Whirlpool supply line, Part Number osmosis system going to the water inlet valve of the ice maker ■ 8212547RP, and check for leaks. -
Page 5: Drain Pump Installation
Drain pump is designed to pump water to a maximum height clear. Turn off shutoff valve on the water pipe. ■ of 10 ft (3 m). Use only Whirlpool approved drain pump kit IMPORTANT: Always drain the water line before making Part Number 1901A. - Page 6 2. Unplug ice maker or disconnect power. 3. Remove the old drain tube and clamp attached to the ice maker bin. 3. Turn off water supply. Wait 5 to 10 minutes for the ice to fall into the storage bin. Remove all ice from bin. NOTE: Discard old drain tube and clamp.
- Page 7 Vent Tube 7. Slide drain pump into the ice maker base on the right side. The pump mounting tab should slip into the rectangular slot NOTE: Do not pinch, kink or damage the vent tube. Check that it in the ice maker base. It will be necessary to tip the pump is not damaged or pinched or kinked between the cabinet and the slightly to slip into the slot.
-
Page 8: Drain Connection
It may be desirable to insulate the drain line thoroughly ■ Drain Connection up to the drain inlet. An Insulation Sleeve kit, Part Number W10365792, is available for purchase. Gravity Drain System Do not connect the outlet end of the drain tube to a closed ■... -
Page 9: Door Reversal-Side Swing Only
Door Stop and End-Cap Reversal Door Reversal—Side Swing Only Tools Needed WARNING Gather the required tools and parts before starting installation. 5/16" wrench Flat putty knife ■ ■ 1/4" wrench Phillips screwdriver ■ ■ Electrical Shock Hazard 5/16" hex-head hinge screw Hinge pin Disconnect power before servicing. - Page 10 Bottom Hinge Reverse Hinges 1. Unscrew and remove the top hinge. Replace the screws in the empty hinge holes. 2. Remove the screws from the bottom of the opposite side of the ice maker cabinet. Turn the top hinge upside down so that the hinge pin points up.
-
Page 11: Leveling
3. Install the white decorative screws on the opposite side of the 7. Use the level to recheck the ice maker to see that it is even door. from front to back and side to side. If the ice maker is not level, repeat steps 2 to 5. - Page 12 7. Remove the right-hand and left-hand screws. Lift the cutter Wash the ice scoop holder along with the other interior ■ grid up and out. components using the following instructions. NOTE: Make sure the plastic spacer from the right-hand side Replace the ice scoop holder by replacing the screws or ■...