Changing The Engine Oil - Energizer eZG1300 User Manual

4. If the foam element is dirty, clean it in warm soapy water, rinse, and allow it
to dry thoroughly, or clean in non-flammable solvent and allow to dry.
5. Dip the foam element in clean engine oil, then squeeze out all excess oil.
The engine will smoke when started if too much oil is left in the filter.
6. Wipe dirt from the air filter unit and cover using a moist rag.

5.5 - Changing the Engine Oil

Used motor oil can cause skin irritations if left in long-term contact with
skin. Wash hands thoroughly with soap and water after handling oil.
Do not dispose of used oil in drains or on soil. Local service shops provide
environmentally-friendly disposal methods.
1. Stop the engine and remove oil filler cap.
2. Place a pan under the engine.
3. Remove the oil drain screw and allow the oil to completely drain into the
pan.
4. Reinstall drain screw before filling the engine with fresh oil. Do not overfill oil
reservoir. Use a funnel to prevent spillage.
5. Reinstall the oil filler cap and tightly fasten.
24