How To Change The Date And Time; How To Set Sleep Parameters; How To Print A Transaction Log; How To Assign A Terminal To A Base Unit - Ingenico iWL2XX User Manual

If Waiters Do not yet Exist
When asked whether you would like to create defaults on your
terminal, press the GREEN button to accept. To decline, press the
YELLOW button.
If Waiters Already Exist
If Default Waiters exist on your terminal and you wish to add a
named waiter, this screen will be displayed. You MUST delete a
Default Waiter before a named waiter can be added. Press the
GREEN button.

29. How to Change the Date and Time

The terminal has a built in clock which maintains the current date and time. If necessary you can
also change the date and time manually. Please note: This will need to be done twice a year when
the clocks change.
1. At the READY prompt, press the MENU button twice. Use the
arrow buttons to view the available options and press the GREEN
button when the Select Function option is highlighted.
2. Key enter the number 30 and press the GREEN button. You will
then be asked to swipe the Supervisor Card through the terminal.
3. The current date will be displayed. Re key the correct date and
press the GREEN button.
4. The current time will be displayed. Re key the correct time and
press the GREEN button.
The terminal will return to the READY prompt.

30. How to Set Sleep Parameters

This function allows you to set the time when the terminal is not in use before it goes into sleep
mode. Having the sleep parameters enabled will save on battery life.
1. At the READY prompt, press the MENU button twice. Use the
arrow buttons to view the available options and press the GREEN
button when the Select Function option is highlighted.
2 Key enter the number 38 and press the GREEN button. You will
then be asked to swipe the Supervisor Card through the terminal.
3. Press ENTER to continue setting Sleep Parameters or Clear to
cancel.
4. Enter the number of minutes before which the terminal goes to
sleep and then press the GREEN button.
Page 28
CREATE Defaults
Are You Sure?
Enter=YES Clear=NO
Waiters Already Exist
Delete ALL if you wish
to remove
SYSTEM MENU
Totals
Print Function Codes
Select Function
Key in Function Code
and then press ENTER
SET DATE/TIME
Enter Current Date
dd/mm/yy
and then press ENTER
SET DATE/TIME
Enter Current Time
dd/mm/yy
and then press ENTER
SYSTEM MENU
Totals
Print Function Codes
Select Function
Key in Function Code
and then press ENTER
SYSTEM
Sleep Parameters?
Enter=YES Clear=NO
The terminal will return to the READY prompt.

31. How to Print a Transaction Log

This function allows you to print a log of your last 100 transactions, should the need arise for exam-
ple to check any financial discrepancies.
1. At the READY prompt, press the MENU button twice. Use the
arrow buttons to view the available options and press the GREEN
button when the Select Function option is highlighted.
2. Key enter the number 16 and press the GREEN button. You will
then be asked to swipe the Supervisor Card through the terminal.
3. To print a transaction log for the selected acquirer, press the
GREEN button. If not, press the YELLOW button.
4. Press the GREEN button again and the transaction log for that
acquirer will be printed. It will show the previous 20 transactions
for that acquirer. Step 3 and 4 will repeat for each acquirer. Once
all have been printed, press the GREEN button and the terminal
will return to the READY prompt.

32. How to Assign a Terminal to a Base Unit

Place the terminal handset onto the base unit.
1. At the READY prompt press the MENU button twice.
2. Use the arrow buttons to view the available options and press
the GREEN button when the Select Function option is highlighted.
3. Key enter the number 36 and press the GREEN button. You will
then be asked to swipe the Supervisor Card through the terminal.
4. To assign the terminal to a base unit press the GREEN button.
To cancel the operation, press the YELLOW button.
5. Select ASSIGN TO BASE and press the GREEN button.
6. Place the handset onto the base unit if you have not already
done so.
The terminal will display different screens to confirm that the base
unit assignment is in progress.
Number of Mins before
going to sleep (1-30)
xx
and then press ENTER
SYSTEM MENU
Totals
Print Function Codes
Select Function
Key in Function Code
and then press ENTER
Print Transaction Log
<Aquirer Name>?
Enter=YES Clear=NO
Print Transaction Log
Continue?
Enter=YES Clear=NO
SYSTEM MENU
Totals
Print Function Codes
Select Function
Key in Function Code
and then press ENTER
SYSTEM
Radio Setup?
Enter=YES Clear=NO
RADIO SETUP
Assign to base
Select base
Remove base
Page 29