Warranty - KERN FIS Operating Instruction

3.2 Warranty

The weighing system is installed by staff members who have received training in
weighing techniques.
We cannot accept any liability for damage resulting from:
- non-observance of our operating conditions and operating instructions
- improper installation
- faulty electrical installation by the user
- modifications to our equipment
- removal of verification and protective marks
- improper operation
- improper handling of foil keyboard (for example, using sharp objects)
- natural wear and tear
- media/liquids which affect the following materials
Any claim to warranty is forfeited if faults/damages are caused due to intervention
by unauthorised persons, especially due to not using original KERN spare parts
or operating material.
All wear parts are excluded from warranty.
No warranty is offered for faults caused by the equipment being operated outside
its prescribed protective system. Damages caused due to environmental
influences such as sea water and unsuitable cleaning material are also excluded
from warranty.
10
Components
Weighing terminal
Load carriers
Type WS . . . G sensors
Housing seal
Keyboard foil
Adjusting knobs for slope of
equipment
Mains line
Line screw fitting
Material
Stainless steel 1.4301,
Stainless steel 1.4301
Stainless steel 1.4301, internal AlCuMg 2,
silicone caoutchouc diaphragms, polyethylene
cover
Frame: Polyamid
Seals: Polyurethan
Polyester
Plastic, including brass nut and washer
(EPDM)
PVC hose line, H05VV-F 3G0,75 incl.
integrally cast shockproof plug, 2.5 metres
long, or with plug for Switzerland or
USA/Canada.
Nickel-faced brass
FIS-BA-e-0512