Using Transparent Media - Roland SJ-740 User Manual

3-5 Using Transparent Media

If the media loaded on the unit is transparent, then at the [SHEET TYPE] menu, select [CLEAR].
When [SHEET TYPE] is set to [CLEAR], the media width is not detected during media setup. This means it is necessary to
specify a printing area that matches the actual width of the media.
When only set to [CLEAR], the printable width is set to the maximum. For more information about printing area, see "7-3
Printing Area."
[SHEET TYPE] Selection Procedure
1 Press the [MENU] key, and press the [
to make the following screen appear on the dis-
play.
Press the [
2
appear on the display.
Use the [
3
then press the [ENTER] key.
4 Specify a printing area for the left-right direc-
tion (the direction of printing carriage move-
ment) that matches the width of the media.
For more information, see " 3-4 Setting the Margins --
Setting the Margins in the Scan Direction."
Chapter 3 - A Wide Variety of Operations
54
] key to make the following screen
] and [ ] key to select [CLEAR],
] key
SHEET TYPE
OPAQUE CLEAR
MENU
SHEET TYPE
SHEET TYPE
OPAQUE OPAQUE