System; System Settings - Nokia 9000 User Manual

system.frm Page 1 Wednesday, January 15, 1997 2:16 PM
Chapter 10 - System
The System applications are started by pressing
the System application button, selecting an ap-
plication in the System main view and pressing
Select. If one System application is active, you
must close it by pressing Close in the applica-
tion's main view before you can start another.
The Nokia 9000 Communicator's applications for
PC connectivity (File transfer, Install/Remove
software, Backup/Restore, Import/Export con-
tacts, Import/Export calendar data) enable you to

System settings

System settings includes all system-related per-
manent settings. The System settings view is en-
tered in the System main view by pressing the
Settings command button. You may define the
settings of the following features after selecting
a feature and pressing Change.
Contrast control – The contrast view shows a test
figure and a set of commands which can be used
to adjust the figure. The '+' command button in-
creases the contrast. The '–' command button
performs the opposite function. When the set-
ting seems satisfactory, press OK.

10. System

connect to a PC. The Security application lets you
determine the level of system security and
change security codes (see "Security").
Note: When one of the PC connection applica-
tions or the fax modem application is activated,
the communicator consumes more power than
normally. To extend the battery operation time,
these applications should be closed when they
are not in use.
Figure 10-1
Screen blanker period – The screen blanker period
pop-up box sets the time period after which the
display will blank out if the device remains inac-
tive. This feature saves the battery and increases
the communicator's operation time. The time-
out value can be between 2 to 15 minutes. The
screen blanker cannot be turned off.
System sounds – System sounds are warning and
error tones, and arriving message tone, key click
tones and alarm sounds. The available settings
are:
10-1