Exchange Of System Connector - Nokia 5140 Manual

nokia
C P
ONNECTING EOPLE
CMO Operations & Logistics
WW Service Solutions & Development
Bochum / Germany

10. EXCHANGE OF SYSTEM CONNECTOR

(PICTURE EXAMPLES TAKEN FROM 5100)
1.) The System Connector Assy is attached with
double-sided adhesive gasket to C-Cover. Also note the
gasket on C-Cover.
3.) Press again SRT-6 between C-Cover and System
Connector Assy and remove the System Connector
Assy.
5.) To remove the remaining adhesive gasket use SRT-
6 only.
Do not use sharp-edged tools for this
7.) Place the System Connector Assy to its guidance
exactly.
Service Manual 5140/5140i Level 1&2
PAGE 14 (23)
CONFIDENTIAL
2.) Press SRT-6 between C-Cover and System
Connector Assy and remove the Battery Cover Assy.
4.) Remove the System Connector Assy.
6.) Remove protection foil from System Connector
Assy.
procedure.
8.) Now press connector to C-Cover firmly, while
taking care not to slip C-Cover on your table.
Copyright © 2004-2005 NOKIA Corporation. All rights reserved.
Approved 4.0
MGR
14.7.2005