Nokia 9000 User Manual page 98

daphne.frm Page 12 Wednesday, January 15, 1997 1:48 PM
14-12
pending upon network features, rounding-off for
billing, taxes and so forth.
Call duration (Menu 6 1)
The communicator provides two call timers
which help you monitor the duration of your
calls.
Last call duration (Menu 6 1 1)
Shows the duration of the last, or current,
outgoing or incoming call in hours, min-
utes and seconds, e.g., 00:02:15.
Note: The duration of incoming calls is not
displayed when you are within your home
network
All calls duration (Menu 6 1 2)
Shows the total cost of all calls made or
received with any SIM card that you have
used with the communicator.
Clear timers (Menu 6 1 3)
Resets all timers.
Note: There is no way to undo the reset
operation.
Call costs (Menu 6 2)
This network service allows you to check var-
ious call costs. The costs are shown in charg-
ing units or units of currency that you have
set within Menu 6 4. The call cost is shown for
each SIM card separately.
Last call units (Menu 6 2 1)
Shows the cost of the last, or current, call
in charging units or the currency set in
Menu 6 4.
All calls units (Menu 6 2 2)
Shows the total cost of all calls in charg-
ing units or units of currency that you
have set in Menu 6 4.
Clear counters (Menu 6 2 3)
Resets all cost counters. Resetting requires
the PIN2 code. This service is not available
with SIM cards that do not support the
PIN2 code.
Note: There is no way to undo the reset
operation.
Call costs limit (Menu 6 3)
This function allows you to limit the total
costs of outgoing calls to a specified number
of charging units or units of the currency that
you have set in Menu 6 4.
Emergency calls to the number 112 can be
made even if there are no charging units left.
Changing the call costs limit requires the
PIN2 code. To turn the limit on, select Set .
Key in the cost limit in charging units or cur-
rency units. If you define the limit in currency
units, you can press or
imal point.
After the limit has been turned on, the quan-
tity of remaining charging or currency units
will be continuously shown on the display
when in the idle mode. When all units have
been used, no calls can be made except for
emergency calls to the number 112.
To turn the limit off, select None .
Show costs in (Menu 6 4)
Within this submenu, you may select whether
the call cost limits (and the amount of re-
maining calling time) will be displayed in cur-
rency or charging units. Contact your network
operator for charging unit prices. Changing
the call costs unit requires the PIN2 code.
To show limits in currency units, select Curren-
cy , or Units to show limits in charging units. If
you selected Currency , key in the charging unit
price. Use or to insert a decimal point.
Next, enter the currency name.
Network selection (Menu 7)
The communicator can be set to automatically
select one of the cellular networks available in
your area, or you may select the desired network
manually in this menu. This function comes in
handy when you want to select a particular net-
work, e.g., due to lower call charges.
Normally, i.e., when the Automatic option is
selected, the communictor tries to utilise the
network it was last registered on. Outside of
the home network service area, the commu-
nicator will select one of the networks which
have a roaming agreement with the home
network.
In the Manual mode, when you pick up a net-
work manually from the network list, the com-
municator will always attempt to register on
that network. If the communicator cannot reach
or loses contact with the selected network, you
are prompted to select another network.
Menus
to insert a dec-