Install/Remove Software; Backup/Restore - Nokia 9000 User Manual

system.frm Page 4 Wednesday, January 15, 1997 2:16 PM
10-4
Transferring files to the com-
municator
After the connection type and PC drive have been
selected in the settings:
Press the left arrow key to activate the com-
municator window.
Select the correct destination folder and press
Open.
Press Change window (or the right arrow key)
to activate the PC window.

Install/Remove software

The Install/Remove software application enables
you to install communicator software from a PC
and to later remove the software from the com-
municator.
The Install/Remove software main view displays
the serial connection type and the PC drive used.
Press Settings to change the connection type or
to redefine the PC drive used. The connection
type is changed by pressing Change. The directo-
ry name and path can be edited manually.
To install software
Press Install in the Install/Remove software
view. The communicator starts to search for
software to install from the designated PC
drive. If installable software is found, it will be
listed on the screen.
Select the software you want to install with
the selection frame and press Install.
When installation is complete, the confirmation
note tells you under which application button

Backup/Restore

The Backup/Restore application enables you to
make backups of various data on your communi-
cator, and to restore it later. Data is backed up in
Install/Remove software
Press Open to open the directory containing
the file(s) you want to transfer. The window
shows the subdirectories and then the files in
alphabetical order. Open a subdirectory, if
necessary, then select the file by moving the
selection frame over it.
Press Copy from PC to start the file transfer.
If you want to copy more files, repeat the pro-
cedure from step .
To terminate the connection to the PC, press Dis-
connect.
the software was installed (destination cannot
be selected). If an application already exists
which has the same name as the software to be
installed, you will be asked to confirm the re-
placement operation by pressing Replace or to
cancel it with Cancel.
To remove software
Press Remove to search for removable soft-
ware on the communicator. The amount of
free space on your communicator is also dis-
played.
Select the software you want to remove and
press Remove.
Note: The set of applications which are on the
communicator at the time of purchase cannot be
removed.
Caution: Beware of viruses. Install into the Nokia
9000 Communicator only software you have ob-
tained from sources which offer adequate pro-
tection against viruses.
sets which are stored in separate directories on
the PC.