getting.frm Page 5 Thursday, January 16, 1997 4:09 PM
Chapter 2 - Getting started
Communicator interface
The communicator interface is activated by
pressing the cover lock catch and opening the
cover (see figure 2-9).
The applications are run in the middle of the dis-
play. The indicators (see figure 2-10) show appli-
cation and system related information (see
"Indicators" in this chapter). The commands al-
ways relate to the column of four command but-
tons on the right side of the display cover.
Figure 2-9
In this User's Manual, the command names ap-
pear in bold and item names, entries and values
shown on the application area are in italics.
Whenever the selection frame is shown, you can
select items by moving the selection frame with
the scroll buttons or the up/down arrow keys (see
"Keyboard" in this chapter).
Figure 2-10
2-5