Motorola MC2100 Quick Start Manual

MC2100 SERIES
QUICK START
GUIDE
2
(MC2180 only)
3
(MC2180 only)
4
5
6
7
1 LED Indicator
2 Volume Up Button
(default) - Programmable
3 Volume Down Button
(default) - Programmable
4 Microphone
5 Power Button
6 I/O Connector
Note:
To warm boot the MC21XX, press and hold the Power
button for five (5) seconds.
To cold boot the MC21XX:
1. Press Power button to suspend the MC21XX. The PowerKey
Action window appears.
2. Tap Safe Battery Swap.
3. Wait for the LED to turn red and then turn off.
4. Simultaneously press the 1, 9 and Power button.
FEATURES
1 12 Battery 16 Scan Exit Window
13 Battery Latches
(see Data Capture Options)
14 Speaker 17 Mini Stylus
15 Handstrap Mount
11
(MC2180 only)
10
12
13
9
8
14
15
17
16
7 Power Input Port
8 Keypad
LED Notifications
9 Navigation
10 Scan Button
LED
11 Touch Screen
(with screen protector)
Charging Status:
Solid green: Fully charged
Blinking amber: charging
Fast blinking amber: Charging error
Data Capture Status:
Red: Scanning active
Green: Good decode
GETTING STARTED
1
2
Install a microSD Card
Insert the Battery
1. Slide the card door down to unlock.
2. Lift card door.
3. Place the microSD card into the holder with the contacts
facing down.
NOTE :
The proper position of the microSD card —
the card connector (i.e., gold area) should be facing down.
4. Lower the card door.
5. Slide card door up to lock into place.
To replace the microSD card, refer to the MC2100 Series User
Guide for instructions.
3 4
Charge the MC21XX Charge the Battery
24 hr
Power Supply
Four-slot Battery Charger
Single-slot USB Charging Cradle
Charging Status:
Solid green: Fully charged
Blinking amber: charging
Fast blinking amber: Charging error
*
It is recommended that this product be charged for 24 hours before the first
use to ensure that the internal battery is fully charged.