Single-slot USB Cradle
The Single-slot USB cradle:
•
Provides 5.4VDC power for operating the MC21XX and charging the battery.
•
Provides a USB port (micro AB receptacle) for data communication between the MC21XX and a host
computer.
•
Provides USB connection through the USB pass-through port for communication with a USB device,
such as a host computer. For communication setup procedures, see
CAUTION
Setup
USB Port
Single-slot USB Cradle Setup
Figure 2-1
Battery Charging
The Single-slot USB cradle can charge the MC21XX battery.
To charge the MC21XX:
Connect the Single-slot USB cradle to a Motorola approved power source.
1.
Slide the MC21XX into the slot. The LED Indicator indicates the MC21XX battery charging status. The
2.
battery charges in less than four hours. See
Ensure that you follow the guidelines for battery safety described in
5-2.
USB Port
USB Cable
Power Port
Table 2-2
for charging status indications.
Accessories
Chapter 3,
Synchronization.
Battery Safety Guidelines on page
AC Line Cord
Power Supply
2 - 3