Network Setup - X-Vision Digital Video Recorder User Manual

5.6 Network Setup

Network setup mode enables you to set every network-related properties.
○
1
○
2
○
3
○
4
○
5
○
6
○
7
○
8
○
9
○
1 0
1. LAN : check on to allow video image transmisstion through TCP/IP.
Default video port is 8100. If you want to change, enter another port no. And restart the program.
2. WEB : check on to allow remote access through web browser
Default web port is 80. If you want to change, check on "Port Setting Option" and enter new port no.
Please make sure that video and web port (8100 & 80) are forwarded to the DVR if there is router or firewall.
3. Modem : check on the box and choose the corrent type of modem that you use for modem-to-modem connection.
4. Serial Network : check on the box and choose COM Port No. to communicate through serial port
5. Audio Port Setting : set the port for transferring sound to remote site. Default port is 8200.
6. Network Image Quality : you can set the image quality trasferred via internet using adjustment bar. The higher the image
becomes, the bigger the size gets.
Total Speed Limit : you can set total transfer frame rate allowance.
X-Vision
41