X-Vision Digital Video Recorder User Manual page 16

16
3.5 Camera/Alarm-Out/TV-Out Panel
1. Camera Select Panel
On each split mode of screen, clicking one channel button will show the split mode including the channel clicked.
(ex : If on 4 split mode with 16 ch inputs, clicking no. 1 channel will display no.1 to 4 ch and clicking no. 5 will be no.5 to 8
ch.)
In case of over 16 cameras connected, you can switch from no.1 to 16 to no.17 to 32 by clicking the arrow button on the
right.
2. Alarm Panel
Shows alarms connected. Clicking each alarm no. will send alarm out.
3. TV-Out Panel
Shows the current channels sent to TV monitor. Select the channel to view from TV monitor by clicking.
Applicable on Sentry 1004 to 3016 models
Only the channel checked on "Enable AV-Out" in Camera Setup Mode will be displayed through TV monitor.
X-Vision