X-Vision Digital Video Recorder User Manual page 34

5.3.1 Setting General Camera Property
In order to set general camera properties, click GENERAL SETUP button and select each camera icon on
the above.
1
2
3
4
5
1. Camer Name : enter the camer name desired to be displayed on the image. The font color can be change by clicking
color button on the right end.
2. Display Camera Name : check on the box to display the camera name.
3. Enable AV Out : check on the box to allow the camera to be viewed through TV monitor.
4. Display Audio Button : check on the box to display audio icon on camera view as the below picture.
Camera Name
Audio Button
5. Video Loss Surveillance : check on each option to enable sending alert when there is no video signal
- Sound Alert : makes beep sound through PC speaker
- E-mail : sends e-mail upon video loss (Refer to E-mail Setup)
- Phone Alert : calls to registered no. upon motion event (Refer to Dial-up Setup)
- Alarm-Out : sends digital outputs (alarm, lamp and so on) checked upon video loss
X-Vision
34