Emergency Recording - X-Vision Digital Video Recorder User Manual

3.7 Emergency Recording

This function enables the current recording mode to switch to continuous recording and higher frame rate
recording while the button is pressed in the emergent case.
The default frame rate for emergency recording is 5fps.
1. Emergency Recording Setup should be done first..
2. You can enter the Setup by moving to "Recording Schedule Setup\Emergency Recording Setup" or right-mouse-clicking
on Emergency Recording Button. Check on video channels to run emergency recording on and set emergency frame rate
each. Or if you want to apply the same frame rate to whole channels, check on "Apply All(fps)", then set frame rate.
3. While in emergency recording mode, the recording will be by the frame rate set from "Emergency Recording Setup"
contiously. For stopping emergency recording, press the button again.
X-Vision
18