Starter - Buell 2005 FIREBOLT Service Manual

HOME

STARTER

REMOVAL
1. Remove seat. See 2.38
1 1
WARNING WARNING
Disconnect negative (-) battery cable first. If positive (+)
cable should contact ground with negative (-) cable con-
nected, the resulting sparks can cause a battery explo-
sion, which could result in death or serious injury.
(00049a)
2. Disconnect battery. See
3. Remove primary cover. See
MARY COVER.
4. Remove sprocket cover. See
NOTE
A ball hex driver may be required to gain access to the starter
mounting bolts.
5. See Figure 5-8. Remove two starter mounting bolts and
washers (1).
6. See Figure 5-9. Remove fastener with washer (1) (met-
ric).
a. Remove protective boot.
b. Remove positive battery cable ring terminal (2).
c. Detach solenoid wire (3).
7. Remove starter and gasket from the gearcase cover side.
5-12 2005 Buell Firebolt: Starter
SEAT.
1.5 BATTERY MAINTENANCE.
REMOVAL under 6.2 PRI-
2.30 SPROCKET COVER.
1. Mounting bolts and washers
2. Starter
Figure 5-8. Starter Mounting
8742
1
1. Fastener with washer (metric)
2. Positive battery cable ring terminal
3. Solenoid wire
Figure 5-9. Starter Wires (Protective Boot Not Shown)
5.7
b0312x5x
1 2
1
3
2