Spark Plug Cables - Buell 2005 FIREBOLT Service Manual

Table of Contents

Advertisement

HOME

SPARK PLUG CABLES

GENERAL
Resistor-type high-tension spark plug cables have a carbon-
impregnated fabric core, instead of solid wire, for radio noise
suppression and improved reliability of electronic compo-
nents. Use the exact replacement cable for best results.
REMOVAL
1
1
WARNING
WARNING
Never disconnect a spark plug cable with the engine run-
ning. If you disconnect a spark plug cable with the
engine running, you may receive a potentially fatal elec-
tric shock from the ignition system which could result in
death or serious injury.
CAUTION
When disconnecting each spark plug cable from its
spark plug terminal, always grasp and pull on the rubber
boot at the end of the cable assembly (as close as possi-
ble to the spark plug terminal). Do not pull on the cable
portion itself. Pulling on the cable will damage the
cable's carbon core.
1.
Remove airbox assembly. See
2.
See
Figure 7-8.
Disconnect spark plug cables from igni-
tion coil and spark plug terminals. Inspect cables for
damage.
4.45 AIRBOX.
8843
1
1.
Front spark plug cable
2.
Rear spark plug cable
Figure 7-8. Spark Plug Cable Location
2005 Buell Firebolt: Electrical
7.4
2
7-9

Advertisement

Table of Contents
loading

This manual is also suitable for:

2005 xb9r firebolt

Table of Contents