Disassembly Procedure - Mitsubishi Electric SEZ-KD25VAQ Technical & Service Manual

7

DISASSEMBLY PROCEDURE

1. Control box
1. Removing the control box cover
(1) Remove the two fixing screws on the cover (A)
to remove it.
2. Thermistor (Intake air)
1. Remove the control box cover according to the
procedure in section [1].
(1) Pull out the thermistor holder (B) and thermis-
tor (C) on the control box.
Exercise caution when removing heavy parts.
Fig. 1
Fig. 2
SEZ-KD·VA model only
Fig. 3
33
(A)
(B),(C)
KD71VA(L) model only