Disassembly Procedure; Control Box; Thermistor (Intake Air) - Mitsubishi Electric Mr. SLIM SEZ Series Technical & Service Manual

[ VIII DISASSEMBLY PROCEDURE ]
VIII DISASSEMBLY PROCEDURE

[1] Disassembly Procedure

SEZ-M25DA(L)2
SEZ-M35DA(L)2
SEZ-M50DA(L)2
SEZ-M60DA(L)2
SEZ-M71DA(L)2

1. Control box

1. Removing the control box cover
(1) Remove the two fixing screws on the cover (A)
to remove it.

2. Thermistor (Intake air)

1. Remove the control box cover according to the
procedure in section 1.
(1) Pull out the thermistor holder (B) and thermis-
tor (C) on the control box.
HWE2101A
Exercise caution when removing heavy parts.
Fig. 1
Fig. 2
SEZ-M·DA model only
Fig. 3
- 44 -
(A)
(B),(C)
M71DA(L) model only
GB