Disassembly Procedure; Control Box; Thermistor (Intake Air) - Mitsubishi Electric Mr. Slim PEAD Series Technical & Service Manual

[ VIII DISASSEMBLY PROCEDURE ]

[1] Disassembly Procedure

VIII DISASSEMBLY PROCEDURE
PEAD-(S)M35JA(L)(2)
PEAD-(S)M50JA(L)(2)
PEAD-(S)M60JA(L)(2)
PEAD-(S)M71JA(L)2
PEAD-(S)M100JA(L)2
PEAD-(S)M125JA(L)2
PEAD-(S)M140JA(L)2

1. Control box

1. Removing the control box cover
(1) Remove the two fixing screws on the cover (A)
to remove it.

2. Thermistor (Intake air)

1. Remove the control box cover according to the
procedure in section 1.
(1) Pull out the thermistor holder (B) and thermis-
tor (C) on the control box.
HWE2107A
Exercise caution when removing heavy parts.
(A)
Fig. 1
Fig. 2
(B), (C)
Fig. 3
- 56 -
GB