Mitsubishi Electric SEZ-KD25VAQ Technical & Service Manual page 39

6. Bearing [KD50·60·71VAQ model only]
1. Removing the bearing
(1) Remove the two fixing screws on the bearing
cover (K) to remove it.
(2) Remove the two bearing retainer screws to
remove the bearing.
7. Heat exchanger
1. Remove the drain pan according to the proce-
dure in section [3].
2. Remove the heat exchanger cover according to
the procedure in section [4] 2.
3. Removing the cover
(1) Remove the two fixing screws on the cover (L)
to remove it.
4. Removing the Heat exchanger
(1) Remove the fixing screws on the heat
exchanger (M) to remove it.
Exercise caution when removing heavy parts.
Fig. 13
Fig. 14
Fig. 15
Fig. 16
37
(L)
(M)
(K)