Forms Length Set (Inches) - Printronix 9012 User's Reference Manual

FORMS LENGTH SET (Inches)

ASCII Code:
Hex Code:
Purpose:
Expression:
where:
Comment:
6-30
P-SERIES
N/A
N/A
Sets the length of forms (paper) in inches.
N/A
n = 1 to 24 to specify the number of inches on a page.
Upon receipt of this code, the current line becomes the first line of the
form. Changing the line spacing will not affect this forms length com
mand. Skip-over perforation is set to the default value. Vertical tab posi
tions are cleared.
Forms length can also be set by the F/L switch on the control panel. The
control code forms length setting from the host computer will override
the control panel setting and be reflected on the display when F/L is
pressed.
Forms length is defined in inches; therefore, subsequent line spacing
changes do not affect the result of this command.
SERIAL MATRIX
ESC C NUL n
1B 43 0 n
CHR$(27);"C";CHR$(0);CHR$(n);
P9012 Programming