Liebert IntelliSlot Installation Manual page 26

Web Interface
To access SNMP Communications settings (for Authentication Traps, RFC-1628 (UPS) MIB, Liebert
Global Products MIB and Heartbeat Trap Interval options) through the Web interface:
• Click on the Configure tab, then SNMP in the left panel (under Management Protocol) and
finally Edit in the right panel. After making changes, click Save.
• Note the options vary according to the type of equipment. RFC-1628 MIB features are available
for UPS/Power equipment only—not for Precision Cooling and other equipment, as shown at
bottom in the examples below.
Configure
tab
Management
Protocol
Click on Edit
to enable any
options
OPTIONS FOR UPS/POWER EQUIPMENT
(includes RFC-1628 MIB features—retrieving data from RFC-1628 MIB objects and sending RFC-1628 MIB traps)
OPTIONS FOR PRECISION COOLING/OTHER EQUIPMENT
(does NOT include RFC-1628 MIB features)
20
Network Settings
Interval choice
sets the
frequency of
Heartbeat
Traps