Table of Contents
Advertisement
10.2
Management Protocol Menu - Choose Modbus/TCP or BACnet/IP
The Management Protocol menu allows you to enable or disable Modbus/TCP or BACnet/IP and
configure settings for that protocol. Consult your network administrator as needed for these settings.
Terminal Emulation (Serial or TCP/IP Connection) / Telnet
To activate Modbus/TCP or BACnet/IP:
1. Choose IP Network Settings from the Main Menu.
2. Choose Management Protocol from the IP Network
Settings Menu.
3. Choose Select Managed Protocol from the Management Protocol Menu, then specify the
protocol and refer to the following sections for more options:
• Modbus/TCP to activate the Modbus TCP server (10.3 - Modbus/TCP Configuration Menu)
• BACnet/IP to activate the BACnet IP server (10.4 - BACnet/IP Server Menu)
To deactivate a protocol that has been enabled, choose Modbus/TCP or BACnet/IP from the
Management Protocol Menu, then choose Disabled.
Web Interface
To activate or deactivate Modbus/TCP or BACnet/IP through the Web interface:
• Click on the Configure tab, Management Protocol in the left panel, then Edit at right.
• Choose a protocol from the Managed Protocol drop-down list—Modbus/TCP or BACnet/IP—to
activate (or choose None to deactivate). After making changes, click Save.
Configure tab
Management
Protocol
Building Management Functions (IS-IPBML & IS-IPBMS Cards Only)
55
Management Protocol Menu
-------------------------
1: Select Managed Protocol
<ESC>: Cancel menu level
Please select a key ?>
Click Edit,
choose a protocol,
then click Save
Hide quick links:
Advertisement
Table of Contents
