Equipment Information; Table 8 Equipment Information Identifiers - Liebert IntelliSlot Installation Manual

4.0 E
QUIPMENT
Equipment Information is optional and identifies the Liebert unit, its
location, a contact person and other information about the unit. The
default value of each field is "Uninitialized."
NOTE
This information also configures the SNMP parameters
sysName, sysContact, sysDescr, and sysLocation available
using RFC-1213 MIB II.
Terminal Emulation (Serial or TCP/IP Connection) / Telnet
To edit any field in this category:
1. From the Main Menu, choose Equipment Information.
2. Enter the number that corresponds to your choice, then enter the identifying information, using
the following as a guide.
Table 8 Equipment Information identifiers
Item
Name
Contact
Location
Description
* Valid characters include spaces and other printable characters except double quotes (").
Web Interface
To access Equipment Information through the Web interface:
• Click on the Configure tab, then Equipment Information in the left panel and finally Edit in
the right panel. After making changes, click Save.
Configure tab
Equipment
Information
Edit
I
NFORMATION
Description
A name for the Liebert unit
A contact person or department responsible
for maintenance and operation of the Liebert unit
The location of the Liebert unit
Other useful information about the unit
for quick reference
Maximum Length*
255 characters
64 characters
64 characters
64 characters
13

Equipment Information

Equipment Information Menu
---------------------------
1: Name Uninitialized
2: Contact Uninitialized
3: Location Uninitialized
4: Description Uninitialized
<ESC>: Cancel menu level
Please select a key ?>