E-Mail Configuration; Table 21 Table - Liebert IntelliSlot Installation Manual

6.1

E-Mail Configuration

Setting up event notifications to be sent via e-mail involves two steps:
enabling the function, then specifying the parameters.
Terminal Emulation (Serial or TCP/IP Connection) / Telnet
To activate and set up e-mail messages:
1. Choose Messaging from the Main Menu, then Email.
Enable Email? [y/n] ?>
2. To enable the e-mail feature, enter y (yes) at the prompt.
3. Choose Email Configuration from the Messaging Menu, then select an option and use the
following guide to make changes.
Table 20 E-mail configuration guide
Parameter
Email From
Email Message
Recipients
Email Subject
Email Customize
Message
SMTP Server
Port
Test Email
View Test Email
Log File
Web Interface
To access E-Mail Configuration through the Web interface:
• Click on the Configure tab, then Email in the left panel and finally Edit in the right panel.
After making changes, click Save.
Configure tab
Email
The e-mail address of the sender—for example, support@company.com—
typically, the address where replies should be sent.
The e-mail will be sent to this list of addresses. To add an e-mail address, use
the format a jsmith@abc.com. Multiple addresses must be added individually.
Changes may be made by entering d to delete an entry or e to edit an entry.
NOTE: To specify multiple recipients of the e-mail message in the Web
interface, use a semicolon (;) to separate addresses in the Email To box.
The subject line of the e-mail. By default, this is the event description—e.g.,
AlarmOnBypass—but it may be customized.
The text of the message sent to e-mail recipients. Choose from a list of items to
include in the message. For details, see 6.3 - Customize Messages.
The IP address or domain name of the SMTP e-mail server that sends
messages.
SMTP server port—typically the default port, 25.
After saving changes to e-mail parameters, send a test e-mail message to verify
the settings are correct. The message status will be displayed.
Choose this option to display a log showing the results of test e-mails.
Description
37
Messaging
Email Configuration Menu
-------------------------
1: Email From 'Uninitialized'
2: Email Message Recipients
3: Email Subject
4: Email Customize Message
5: SMTP Server 'Uninitialized'
6: Port 25
7: Test Email
8: View Test Email Log File
<ESC>: Cancel menu level
Please select a key ?>
Maximum
64
characters
64
characters
120
characters
—
32
characters
—
—
—
Edit