Attaching To The Tm-H5000 Series/Tm-J8000 - Epson DM-D110 Technical Reference Manual

2.4.3 Attaching to the TM-H5000 Series/TM-J8000

The DM-D110 can be attached directly to the TM-H5000II/TM-J8000 printers using the "DM-D
pole unit for TM printers (Type B)" (DP-503).
2.4.3.1 Required items
The following items are used to attach the DM-D110 to the TM-H5000II /TM-J8000 printers.
These items are packed with the "DM-D pole unit for TM printers (Type B)" (DP-503).
base
2.4.3.2 Assembling steps
1. Pass the cable for the DM-D110 through support C and attach support C to the DM-D110.
When using support B for extension, insert the tab on support B into the hole on support C
until you feel it click.
2-16 Setup information
fixing screws
support A
support B
(for extension)
When using support B for
extension
. A
Rev