Emc And Safety Standards Applied - Epson DM-D110 Technical Reference Manual

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any
form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written
permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information
contained herein. While every precaution has been taken in the preparation of this book, Seiko Epson Corporation
assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use
of the information contained herein.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for
damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of
this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to
strictly comply with Seiko Epson Corporation's operating and maintenance instructions.
Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of any options or
any consumable products other than those designated as Original Epson Products or Epson Approved Products by
Seiko Epson Corporation.
EPSON and ESC/POS are registered trademarks of Seiko Epson Corporation in the U.S. and other countries.
NOTICE:
The contents of this manual are subject to change without notice.
Copyright © 2006 by Seiko Epson Corporation, Nagano, Japan.

EMC and Safety Standards Applied

EMC and Safety Standards Applied
Product Name: DM-D110/DM-D210
Model Name: M58DB/M59DB
The following standards are applied only to the display that is so labeled. (EMC is tested using the EPSON power
supplies.)
Europe: CE marking
Safety:
North America: EMI:
Safety:
Japan: EMC:
Oceania: EMC:
You are cautioned that changes or modifications not expressly approved by SEIKO EPSON Corporation could void
your authority to operate the equipment.
CE Marking
The display conforms to the following Directives and Norms:
Directive 89/336/EEC
EN 55022 Class B
EN 55024
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-11
Rev. A
Safety Precautions
EN 60950-1
FCC/ICES-003 Class A
UL 90650-1/CSA C22.2
No. 60950-1
VCCI Class A
AS/NZS CISPR22 Class B
WARNING
DM-D110 Technical Reference Guide
iii