Epson DM-D110 Technical Reference Manual page 22

6. When not using the extension cable for the power supply packed with the DM-D stand, go
to step 7.
When using the extension cable, connect it (with the arrow mark up) to the extension cable
connector indicated by "POWER OUT" on the DM-D stand; then connect the other end to
the power connector on the printer.
extension cable
connector
7. Connect the DC cable of the power supply unit (with the arrow mark up) to the power
supply unit connector indicated by "POWER IN" on the DM-D stand.
power supply unit
connector
8. When using as a standalone product, set the jumpers. (See "Jumper setting" on page 2-4.)
2-8 Setup information
extension cable for
power supply
DC cable of power
supply unit
Rev
. A